Faster And Safer As-Built Drawings Available
Piping systems have been around since the time of ancient Rome. Roman engineers developed pipe that was constructed of flat sheets of lead that was rolled and seamed. It was then connected into a system to provide water to the bath houses. Later in 16th and 17th century Europe, wooden water pipes were quite common. Pipes were constructed from hollowed logs or constructed from staves and hoops similar to a wooden barrel. Since the Industrial Revolution, pipe and piping systems have evolved to carry more than just water and other fluids. Technology has improved and a myriad of materials is now being used for manufactured pipe. These advancements have increased the allowable pressures and the types of products that the piping can convey.
For many years, gathering field data on existing piping systems remained basically unchanged. Even with the advent of CAD systems in the past few decades, a minimum of two field technicians wielding measuring tapes and sketch pads remained the best approach. When the piping systems were in accessible locations and squarely assembled, it was not extremely difficult for the technicians to hand sketch a field isometric diagram to be redrawn later back in the office.
As piping systems became more complex and more hazardous materials were being handled by them, the people collecting field data were often required to place themselves in potentially precarious situations to obtain the needed measurements. Further, the man hours required to obtain the field data could be very costly to the customer. The pitfalls of this method were many - missed dimensions, smudged or damaged sketches - all of which could stop the work in its tracks. Many times a return trip to the field was necessary to gather missed or erroneous data. Also, the exposure of personnel to hazardous locations or materials, coupled with a lack of access, greatly magnified the difficulty.
Those were the old days. Now, in the 21st century, new methods of field-data collection have emerged. Hunt, Guillot & Associates (HGA), an engineering firm based in Ruston, LA has worked closely with COADE, Inc., a Houston-based provider of software for multiple plant design and engineering disciplines, in pioneering the use of the CADWorx® fieldPipe surveying system for the engineering services industry.
The new system integrates with the Leica Total Station surveying instrument that utilizes visible laser telemetry to make very accurate distance measurements. The system interfaces with a hardened laptop PC and fully integrates with the COADE CADWorx piping design software. Using the new system, the technician can quickly develop three dimensional as-built drawings from scratch while in the field. Complex piping system components can be modeled quickly and easily, from a minimum of set-up locations. In many cases, the technician can make all the necessary measurements from the ground or from another safely accessible location. Aside from the safety aspect, the system is extremely accurate. HGA tests have shown that an accuracy of plus or minus 1/8-inch at 300 feet is not uncommon.
- Coatings, pipe joint
- Compressor components
- Contractor, pipeline
- Contractor, river crossing/ directional drilling
- Directional drilling rigs, large
- Fittings, valves: plastic
- Meters, flow
- Pigs, cleaning
- Pigs, intelligent
- Pigs, scraper/ sphere launchers/ traps
- Scada systems
- Ultrasonic inspection
- Vacuum excavators/ potholing
- Valves, ball
- Welding systems, automatic